Installation, Before installation, Power supply cord connection – Clarion SIRIUS DSC920S User Manual
Page 8: Accessories, English

8
DSC920S
English
Before Installation
1. This set is exclusively for use in cars with a
negative ground, 12 V power supply.
2. Read these instructions carefully.
3. Be sure to disconnect the battery “–” terminal
before starting. This is to prevent short cir-
cuits during installation. (Figure 1)
5.INSTALLATION
Power supply cord connection
Connect the connection cable securely.
Connect the L-shaped side of the connection
cable to the terminal of the Sirius Satellite Radio
(DSH920S).
Note:
For other connections, refer to the Owner’s manual
provided with the Sirius Satellite Radio (DSH920S).
Car battery
Fig 1
Accessories
1
Owner’s manual .......................................... 1
2
Warranty card .............................................. 1
3
Power suply cord ......................................... 1
4
Connection cord .......................................... 1
5
Parts bag .......................................................
• Cord holder ................................................ 2
• Velcro tape (large A) .................................. 2
• Velcro tape (small B) .................................. 2
3
4