beautypg.com

Programming homelink – Jeep 2010 Grand Cherokee SRT - Owner Manual User Manual

Page 130

background image

NOTE:

HomeLink

௡ is disabled when the Vehicle Secu-

rity Alarm is active.

WARNING!

Your motorized door or gate will open and close

while you are training the Universal Transceiver.
Do not train the transceiver if people, pets or other
objects are in the path of the door or gate. Only use
this transceiver with a garage door opener that has
a “stop and reverse” feature as required by federal
safety standards. This includes most garage door
opener models manufactured after 1982. Do not
use a garage door opener without these safety
features. Call toll-free 1–800–355–3515 or, on the
Internet at www.HomeLink.com for safety infor-
mation or assistance.

(Continued)

WARNING! (Continued)

Vehicle exhaust contains carbon monoxide, a dan-

gerous gas. Do not run your vehicle in the garage
while training the transceiver. Exhaust gas can
cause serious injury or death.

Programming HomeLink

Before You Begin
If you have not trained any of the HomeLink

௡ buttons,

erase all channels before you begin training.

To do this, press and hold the two outside buttons for up
to 20 seconds. The EVIC will display “CLEARING
CHANNELS.” Release the buttons when the EVIC mes-
sage states “CHANNELS CLEARED.”

It is recommended that a new battery be placed in the
hand-held transmitter of the device being copied to

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

129

This manual is related to the following products: