Operating your vehicle, Turn signal/lights lever, Headlights/parking lights – Jeep 2010 Grand Cherokee SRT - User Guide User Manual
Page 20: Smartbeams, Instrument panel dimmer, Flash to pass
![background image](/manuals/637370/20/background.png)
TURN SIGNAL/LIGHTS LEVER
Headlights/Parking Lights
• Rotate the end of the lever to the first detent for parking lights
, the second detent
for headlights
and the third detent for AUTO.
• When set to AUTO, the system automatically turns the headlights on or off based on
ambient light levels.
SmartBeams™
• Automatically controls the use of the headlight high beams. Refer to Programmable
Features in Getting Started for further details. Refer to Programmable Features in
Getting Started for further details.
Instrument Panel Dimmer
• Rotate the center portion of the lever to the extreme bottom position to fully dim the
instrument panel lights and prevent the interior lights from illuminating when a door is
opened.
• Rotate the center portion of the lever up to increase the brightness of the instrument
panel lights when the parking lights or headlights are on.
• Rotate the center portion of the lever upward to the next detent position to brighten the
odometer and radio controls when the parking lights or headlights are on.
• Rotate the center portion of the lever upward to the last detent to turn on the interior
lighting.
Flash To Pass
• Pull the lever toward you to activate the high beams. The high beams will remain on until
the lever is released.
OPERATING YOUR VEHICLE
18