Turn signal/lights lever – Jeep 2009 Wrangler Unlimited - Quick Reference Guide User Manual
Page 9

Turn signal/lighTs lever:
HEADLIGHTS/pARkING LIGHTS
• Rotate the end of the lever to the first detent for parking lights and to the
second detent for headlights.
INSTRuMENT pANEL DIMMER
• Rotate the dimmer control to the extreme bottom position to fully dim the
instrument panel lights and prevent the interior lights from illuminating
when a door is opened.
• Rotate the center portion of the lever up to increase the brightness of the
instrument panel lights when the parking lights or headlights are on.
• Rotate the center portion upward to the next detent position to brighten
the odometer and radio controls when the parking lights or headlights
are on.
• Rotate the center portion upward to the last detent to turn on the
interior lighting.
HIGH BEAM OpERATION
• Push the lever forward to activate the high beams.
FOG LIGHTS
• Turn on the parking lights or low beam headlights and pull out the end of
the lever.
TuRN SIGNALS/LANE CHANGE ASSIST
• Tap the lever up or down once and the turn signal (right or left) will flash
three times and automatically turn off.
lights
Fog lights
dimmer
push high Beams
188152_09b_Wrangler_QRG_120908.indd 10
4/24/09 1:55:24 PM