Jeep 2009 Patriot - Quick Reference Guide - Manual (Page 10)

vehicle features
speed conTrol lever:
CRuISE ON/Off
• Press the ON/OFF button to activate the Speed Control.
• CRUISE will appear on the instrument cluster to indicate the Speed
Control is on.
• Press the ON/OFF button a second time to turn the system off.
SET
• With Speed Control on, press down and release the lever to set a
desired speed.
ACCEL/dECEL
• Press and hold the lever up to accelerate or down to decelerate the
vehicle; release the lever to save the new set speed.
• Once a speed is set, tapping the lever up or down will increase or
decrease the set speed approximately 1 mph (2 km/h).
CANCEL
• Pull the lever toward you, push the clutch pedal, or apply the brakes to
cancel the set speed and maintain the set speed memory.
• Press the ON/OFF button to turn the system off and erase the set
speed memory.
RESuME
• To resume a previously selected speed in memory, press the lever up
and release.
press
on/oFF
Button
196632_09b_Patriot_QRG_120808b.indd 11 4/24/09 2:10:20 PM