Evic functions – Jeep 2009 Patriot - Owner Manual User Manual
Page 183
Unless reset, this message will continue to display each
time you turn the ignition switch to the ON/RUN
position. To turn off the message temporarily, press and
release the Trip Odometer button on the instrument
cluster. To reset the oil change indicator system (after
performing the scheduled maintenance) refer to the fol-
lowing procedure.
1. Turn the ignition switch to the ON position. Do not
start the engine.
2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary repeat this procedure.
EVIC Functions
Press the EVIC button until one of the following func-
tions is displayed on the EVIC:
• Compass/Temperature/Audio
• Average Fuel Economy
EVIC Button
UNDERSTANDING YOUR INSTRUMENT PANEL
181
4