Jeep 2009 Liberty - Owner Manual - Manual (Page 180)

Using Operator Mode
Press the switch rearward and hold it, the Sky Slider
௡
will open from the front and move toward the rear of the
vehicle.
Press the switch forward and hold it, the Sky Slider
௡ will
open from the rear and move toward the front of the
vehicle.
NOTE: During operation, any movement of the Sky
Slider
௡ switch will stop the Sky Slider௡ roof.
Closing the Sky Slider
ா
Using Automatic Mode
Press and release the button in the center of the switch
and the Sky Slider
௡ will close automatically from any
position.
Using Operator Mode
If the Sky Slider
௡ is open from the front, press the switch
forward and hold it, the Sky Slider ௡ will move forward.
Release the switch to stop the Sky Slider
௡ travel at any
point.
If the Sky Slider ௡ is open from the rear, press the switch
rearward and hold it and the Sky Slider ௡ will move
rearward. Release the switch to stop the Sky Slider
௡
travel at any point.
Manual Override
The Sky Slider
௡ drive motors are mounted to the roof
above the cargo lamp. In the event that your vehicle
losses battery power, you can close the Sky Slider
௡ by
turning the drive gears in the appropriate motor with a
6 mm Allen wrench. To do so, you must first remove the
cargo lamp from the headliner. Then, insert the wrench
into the “Allen” shaped hole in the appropriate motor
and turn the wrench clockwise until the top closes
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE