Clarion VMA6492 - Manual (Page 3)

2
D
ESCRIPTION
B
UTTONS
VMA6492 6.4” TFT LCD Monitor
P
RECAUTIONS
:
• This monitor is intended for use in DC 12V, negative ground vehicles.
• Do not operate the monitor in ways other than described in this guide. Doing
so may cause damage and void the warranty.
• Be careful not to run down the car’s battery while using a multimedia system
with the engine stopped. Doing so may damage the vehicle’s battery or the
multimedia system.
• Do not disassemble or modify the monitor. Doing so may damage it and void
the warranty.
• Keep moisture away from the set. Water and humidity may damage the inter-
nal circuitry.
• Do not let the monitor become overheated. If the temperature inside the vehi-
cle is high or the monitor has been exposed to direct sunlight, lower the moni-
tor’s temperature before use. (The liquid crystal panel operates within a tem-
perature range of 30 – 113 degrees F).
• In extremely cold temperatures, the movement of the picture may slow and the
picture may become dark. The monitor will work normally once the tempera-
ture increases to its normal operation range.
• Small black or shiny dots may be seen inside the liquid crystal panel. These
are normal when manufacturing liquid crystal products.
D
ESCRIPTION OF
B
UTTON
A
ND
C
ONNECTORS
:
1
Power Indicator LED
2 Remote Sensor
3
Brightness Controls
4
Video IN RCA
5
2-Pin Molex Power Connector
6 IR Serial Remote OUT
7
Input Selector Switch - Video/RGB
8
8-pin RGB input DIN cable