Hybrid Racing HR K-Series Fuel Rail - Manual (Page 6)

6
Install Guide
STEP 9:
Line the injectors up with the
holes on the intake manifold and
press the rail onto the intake
manifold. Using a 12mm socket,
install and tighten the (2) nuts
holding the fuel rail on. (FIG 9)
STEP 10:
Reconnect the fuel line on the
quick disconnect fitting. Do not re
-install the cover that you re-
moved in step 3A. (FIG 10)
STEP 11:
Next we need to remove the plastic cover on the injector wiring harness so we can re-
locate it. Using a flat head, pry each clip apart and remove the cover as shown in FIG
11A and FIG 11B.