Habey FW-1042 - Manual (Page 3)

www.habeyusa.com www.habeyusa.com
Locate the memory slot. Ensure memory is a 204-
Pin SO DIMM. Align notch in memory circuit with
corresponding guide on the memory slot. Insert the
memory circut at a 45° angle and press the circuit
flat and secure it to the memory slot with an audible
click on each side of the memory slot.
Step 5 - Memory
Step 6 - Rack Mounting
Mount the ears to the front side of the enclosure by
securing the ears to the side of the enclosure with
the included screws.
Locate the included rack mount brackets (ears).
Your system is now ready. Connect the
power cable to a power source and press
the power button on the front of the system.
Step 7 - Hardware Installation Complete