Gastroback 40131 Vital Juicer - Manual (Page 6)

7
Assembling the Juicer
Before first use, clean all removable parts of the juicer in warm soapy water (see Care and Cleaning).
For assembling please refer to the figures above (see Know Your Centrifugal Juicer).
WARNING: Please handle with care. There are extremely sharp cutting blades in the base of the fil-
ter basket and a sharp protrusion in the feed chute. Before you plug in the juicer, always ensure that
the appliance is assembled correctly.
1. Place the filter base on the top of the motor base.
2. Lock the filter base by pushing it slightly down and rotating
it counter-clockwise as far as possible without violation.
3. Insert the filter basket inside the filter base.
Rotate the filter basket in the filter base until it is seated on the gear.
The upper edge of the filter basket may not protrude the filter base.
CAUTION: Rotate the filter basket to ensure that it is mounted properly and will not wobble or tilt.
The filter basket must rotate easily and without rubbing on the filter base.
4. Place the juicer cover over the filter base.
The juicer cover can only be mounted in the correct orientation: The feed
chute must be centred above the filter basket, the juicer cover must seat
firmly on the rim of the filter base and the safety cover lock slips into the
locking slot of the filter base.
5. Rotate the juicer cover clockwise until the safety cover lock slips
into the locking slot of the filter base.
40131_Gebrauch_GB.qxd 07.10.2004 13:53 Uhr Seite 7