Gastroback 41124 Elektric Citrus Juicer User Manual
Page 7

17
warning:
Before connecting to the power supply, always ensure,
that the appliance is assembled properly and that there are no utensils
in the filter basket.
Do not insert your hands, cooking utensils or any other objects (i.e.
hair, clothes, brushes, tissue) in the filter basket, when the appliance is
connected to the power supply. Do not place the appliance on wet or
damp surfaces.
Always keep the table or counter dry and clean. Do not drip or spill any
liquids on the motor base or power cord. Do not place any tissue or
similar materials under the motor base to avoid fire and electric shock.
When liquids are spilled over or under the motor base than immediately
unplug the appliance and dry the motor base and the table or counter.
1.
Place a jug or a suitable large cup or drinking glass under the spout.
2.
Cut the fruit in half, using a sharp knife. It is good advice to cut the
fruit at right angles to the filets.
warning:
Do not touch the juice cone with your hands or grasp in
the filter basket while the appliance is connected to the power supply.
3.
Plug the power connector into a 220-240V AC wall power outlet.
4.
With the cut facing down place a half of your fruit on the juice cone
and gently press down. The juice cone starts rotating and begins the
juicing process. For best results, adjust the hold on the fruit to ensure,
that all parts of the fruit flesh are squeezed and push the juice cone
gently and slowly down without violation.
CauTion:
Do not put excessive pressure on the juice cone. Otherwise
the motor starts getting louder and the speed of the motor decreases
during operation. In addition, the white bitter skins of the fruit will be
scraped from the shell. Ensure that the spout is not blocked during ope-
ration. Do not allow the juice container to overfill.
To increase the stability of the jug or cup and to keep your table or
counter clean and dry, you may use suitable coaster.
To prevent dripping and spilling of juice, it is possible to seal the spout
during juicing and collect the juice in the juice container. The juice
container has a capacity of max. 200 ml (1 drinking glass or 1 medium-
sized cup).
CauTion:
Do not to overfill the juice container.
Close the spout: lift the spout upwards until it settles with a click.
Empty the juice container: Place a suitable vessel under the spout and
gently push down the spout to open the seal and empty the juice con-
tainer.
5.
The motor stops automatically when the fruit is removed from the juice cone. You may process
another fruit half beginning with step 4.
warning:
Always unplug the appliance, before removing the pulp from the filter basket or
disassembling the appliance or moving the appliance.