Cd e f g – Gastroback 42420 Colour Vision Kettle User Manual

Page 10

Colour

green

bright blue

dark blue

pink

red

temperature 40 °C

50 °C

60 °C

70 °C

85 °C

Your kettle will cool down to the selected temperature and hold the temperature until the

kettle is turned off (for 2 hours at a maximum).
You may also want to bring cold liquid to a desired temperature by avoiding

an initial boil (e.g. milk).
Fill the kettle with liquid. After the water has boiled, select the desired temper-

ature by pressing the temperature select/KEEP WARM button (picture C) until

the red dot on the display is lined up with the desired temperature (picture

D). Thus, the KEEP WARM button will illuminate and the illumination of the

water level indicator will show the colour assigned to the chosen tempera-

ture, indicating that your kettle is working to reach the desired temperature.
nOte: For water, it is suggested to complete an initial boil before using the

keep warm setting.

WArnInG:

Extra care should be taken when utilising the kettle to prepare baby bottles.

Always test the interior temperature of the bottle before giving to a baby.

Pre-setting the KeeP WArM mode

You may pre-set the kettle to automatically switch to the KEEP WARM mode

after boiling the water. To do this, select the desired temperature by press-

ing the temperature select/KEEP WARM button (picture E) until the red dot

on the display is lined up with the desired temperature (picture F). Press

the ON/OFF button (picture G). The KEEP WARM button and the ON/

OFF button will illuminate. The display will start off displaying LO but as the

temperature of the water rises above 40 degrees, it will display the actual

water temperature.
nOte: The displayed temperature may vary up to +/- 5-8 degrees.
After the kettle has finished its boiling cycle you will hear a beep sound

and the control lamp of the ON/OFF button goes out. The temperature of

the water will then start to drop until it reaches the temperature selected.

This may take some time. The kettle will then enter keep warm mode and

will occasionally switch on and off to maintain the water at the selected

temperature.
nOte: Your wizard kettle will automatically switch off after 2 hours in the keep warm

mode.
nOte: Note that if a low temperature such as 50ºC is selected, the kettle may not have

sufficient time to cool down to this temperature during the 2 hour keep warm period.

turning off the KeeP WArM mode

If you wish to turn off your kettle in the keep warm mode, simply press the KEEP WARM

button or lift the kettle off its power base.
nOte: If you remove the kettle from the power base in the KEEP WARM mode, your kettle

will automatically switch off. To ensure the KEEP WARM feature remains engaged, press