Gastroback 41600 Home Culture Design Electric Knife - Manual (Page 7)

ergonomic handle: It provides convenient and simple to operate. The ergonomic design
provides comfort, versatility and control when carving both vertically and horizontally.
Stand: The knife can stand on the table. The blades should always face down.
Safety guards: It is a handle for insert and removal of blades.
oPeratIon
The Electric Knife works extremely quick and is designed only for short time operation of
max. 7 minutes. If you need it for longer, switch it off after 7 minutes and allow the motor
to cool for 3 minutes.
The appliance has a biased-on switch with safety lock, which prevents switching on of the
appliance if the switch is not handled correctly.
If the motor slows down or can not reach its normal speed, then release the on button, and
unplug the appliance from the wall power outlet. Check whether there is any obstruction
between the blades, and remove it. Act upon instructions ›Care and Cleaning‹.
Before fIrSt uSe
After unpacking, remove all promotional and packing materials as well as any foreign
objects.
Before first use and after a long period of storage, clean the blades and the appliance with
a damp sponge and warm soapy water (see ›Care and Cleaning‹). Before connecting the
appliance to the mains power supply, always ensure that the appliance is assembled cor-
rectly, according to the following instructions. always release the on button, wait until the
motor stops and unplug the appliance before assembling or dismantling. The appliance is
not developed for cutting extremely hard food, such as bones or seeds of fruits.
1. Place the container on a suitable, stable, dry, and clean working surface. (see:
›Safeguards for Daily Operation‹).
2. Connect the two blades before you insert them into the handle.
warnInG: Moving the on switch the motor does function even when the blades are not
correctly assembled. Do not place your fingers in the blade slot of the handle. The blades
of the knife insert are extremely sharp! Do not touch the blades. Always grasp the knife
insert by the safety guards.
Interlock blades together before inserting into the appliance. To assemble blades, grasp
shaft ends below the safety guards. Take the blade with the rivet in your left hand. The rivet
should be facing upright and the safety guard downward. With the
right hand you take the other blade (safety guard facing upright).
This blade has a hole and a narrow channel.
Bring blades together ensuring tips remain together (see picture).
channel
19