Gastroback 42700 Design Coffee Electronic - Manual (Page 11)

31
2. IMMEDIATELY put back the glass carafe on the warming plate to avoid that the filter
basket will overflow. Doing so, ensure that the coffee drips into the glass carafe again.
adjusting the warming plate Temperature
The coffeemaker offers the option of adjusting the temperature setting of the warming plate
to slightly reduce the temperature of the coffee after it has been brewed. When starting
a new brewing cycle manually, a steady orange light indicating the higher temperature
setting will appear on the warmer button.
1. In order to reduce the temperature setting of the warming plate, push the warmer
button once, and the steady orange light will then blink.
The Temperature setting (high or low) will continue to operate as long as the unit is on.
After switching off, the coffeemaker will maintain the temperature of the higher setting,
indicated by the steady orange light.
2. To increase the warming plate temperature to normal operation, simply press the
warmer button again. The orange light will shine continuously.
automatic operation
Using the automatic operation feature, you can program your coffeemaker to prepare your
coffee automatically on a pre-defined time (e.g. on your lunch break).
warning: Please keep in mind that the coffeemaker will be left unattended, while con-
nected to the power supply, and during operation. Thus, special care is necessary to avoid
injuries to persons or damage caused by fire, electric shock or hot liquids or steam. Thus,
closely and meticulously keep to the instructions in the section important
safeguards. Always ensure that you prepared the coffeemaker correctly and completely
for the brewing cycle, before activating automatic operation.
we strongly recommend, performing and attending a normal brewing cycle
to learn, how to operate your coffeemaker correctly, before using automatic
operation. in this way you will recognize problems, arising from handling
your coffeemaker.
adjusting the Clock
You may set the clock any time before, during or after brewing. However, you must connect
the coffeemaker to the power supply. The coffeemaker will keep the setting as long as it is
connected to the power supply.
1. Press the Hour or min button to set the current time. Press and hold the button and the
hands of the clock will move around the clock face and stop, when you release the button.
note: am indicates the morning hours; pm indicates the afternoon.
selecting the auto-Brew start Time
note: For adjusting the start time the clock must be set. (See: Setting the Clock)
1. Press the program button. The letter >p< will blink on the lower left of the display.
2. Adjust the time you want to start the brewing cycle by using the Hour and min buttons
following the procedure for setting the clock.