Gastroback 42602 Design Coffee Grinder Advanced - Manual (Page 10)

powder. The finer the coffee powder and the more coffee powder is used the stronger
the taste and the more caffeine you will get.
• Coffee flavour and strength is a personal preference. Vary the type of coffee
beans, amount of coffee and fineness of grind to find the flavour you prefer.
Tips for the grind
• The coffee must be finely ground, but not too fine (the correct grind should look gritty, like
salt or sand).
• If the grind is too fine, the water, when brewing, will not flow through the coffee even under
pressure (this grind looks like powder and feels like flour when rubbed between fingers).
• If the grind is too coarse, the water, when brewing, will flow too fast through the coffee,
preventing a full flavoured extraction.
ImpORTAnT:
Do not overload the motor with food that is oversized or too hard. Turn the
appliance ´OFF` as soon as the motor stalls or stucks to avoid overheating of the motor.
CARE AnD CLEAnInG
WARnInG: To avoid injury to persons and damage, always turn the appliance ´OFF`, wait
for the motor to stop completely and unplug the appliance, immediately after operation and
before assembling/disassembling or cleaning the appliance.
ATTEnTIOn: Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfect-
ants, bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this could
damage the surfaces. Always handle the entire appliance with care and without violence.
1. Unplug the appliance from the power outlet before cleaning.
2. Remove Bean Container by turning counterclockwise to ‘Align’ symbols, then lift straight up.
3. Remove the Ground Coffee Container by pulling out from the left-hand side of the Coffee
Grinder.
4. The Removable Ground Coffee Container, Bean Container and Lid should be washed in
warm soapy water, rinsed and dried thoroughly.
5. Polish with a soft, dry cloth. Do not use abrasives. When the units are dry assemble the appli-
ance for storage or usage.
Cleaning the motor housing
WARnInG: Do not place the appliance or any parts of it in an automatic dishwasher or pour
boiling water over it. Do not immerse the motor or power cord in any liquids or spill any liquids on it
or place the motor on wet surfaces. Always wipe off spilled liquids immediately. When liquids are
spilled on the motor housing, immediately unplug the appliance and dry the motor housing to
avoid risk of electric shock or fire. Do not
attempt to operate the appliance, when liquids are
on or in the motor housing.
1. Always turn the appliance ´OFF`, wait for the motor to stop completely, and unplug the
appliance from the power outlet before you start cleaning the motor housing.
2. Wipe the motor housing and power cord with a damp soft cloth. Take care not to spill or
drip water or any other liquids on the motor housing.
22