Fotodiox EZ Pro Softbox - Manual (Page 2)

2 1
t
he
s
oftbox
Specs and Features
Pro Studio Solutions EZ-Pro
t his U niqUely D esigneD s oftbox is perfect for studio and location shooting. It
is made with Fotodiox high quality reflective and diffusive material. The
dome of the softbox is made of durable Pro-grade omni-bounce silver
reflective fabric with black backing. It also features a neutral diffusive
baffle inside the dome to provide softer lighting if needed. A diffusive
white fabric closes the front of the softbox and is attached by Velcro.
The Softbox features a patent and unique beauty dish which eliminates
the harsh hot spot common in other softboxes.
Product Features:
• Assemble and dissemble in a heart beat
• Great for travel. Pro grade, heat resistant reflective fabric
• Heavy duty construction
• Features inner baffle, and outer diffusive cover for even light throw
• Sealable venting for use with modeling lamp or continuous lighting
• Rotation speeding ring with thumb screw lock
1x Carrying Case 1x Softbox
1x Outer Diffuser
1x Beauty dish
1x Inner Diffuser
1x Speedring
Insert
C
ontents
Stripbox, Rectangular/Square and Octagon Softboxes Include
1
2
a
ssembling
t
he
s
oftbox
Find a large open area and
stand the Softbox on the
floor, silver side up.
To open, push the umbrella
plate against the floor until it
clicks / locks.
Place the beauty dish in
the center rod at your
desired distance along the
center rod.
3
4
5
Connect all corners of the
Inner Diffuser to the elastic
bands.
Grab the Outer Diffuser
and attach the Velcro
to the entire perimeter of
the Softbox. Press firmly
around the perimeter to
close any gaps between
the Shell and the Diffuser.
To replace the insert (if needed) simply remove the four
screws from the plate, remove the existing insert and
replace it with a new insert screwing it back on.
Be sure attach the Diffuser
on the inner side of the
Softbox, leaving a good
amount of Velcro to
attach a Grid if desired.