English, Auto store function for tp stations, Selecting pty – Clarion VXZ758R User Manual
Page 20: Pty seek, Rds operations

20
VXZ758R
280-8178-00
English
PTY item
ENGLISH
Contents
1
News
News
2
Info
Information
3
Pop M
Pop Music
4
Sport
Sport
5
Classics
Serious Classical Music
6
Easy M
Easy Listening Music
Preset
number
Auto store function for TP
stations
You can automatically store up to 6 TP stations into
preset memory. If the number of TP can be received
less than 6, broadcast stations already stored in
memory and left without being overwritten.
As “TA” lit in the display, press and hold the [PS/
AS] button for 2 seconds or longer. The TP sta-
tions with the good reception sensitivity are
stored into preset memory.
∗ Even if you select FM1 or FM2, a TP station is stored
into memory for FM3.
PTY
This function enables you to listen to a broadcast
of the selected programme type even if the unit
is on a function mode other than radio.
∗The factory default setting is “OFF“.
∗ Some countries do not yet have PTY broadcast.
∗ In the TA standby mode, a TP station has priority
over a PTY broadcast station.
●Setting/Cancelling the PTY standby mode
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Press the [
a]/[d] button to select “PTY”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
∗ You cannot select “ON” or “OFF” during a TA,
ALARM or PTY interrupt.
● ON:
“PTY” is lit in the display and the PTY standby
mode turns on.
● OFF:
“PTY” goes off in the display and the PTY
standby mode turns off.
4. Press the [ADJ] button to return to the previ-
ous mode.
●Cancelling a PTY interrupt broadcast
Press the [TA] button or [SRC] button during the
PTY broadcast, the PTY interrupt is cancelled
and the unit returns to PTY standby mode.
Selecting PTY
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Press the [
a]/[d] button to select “PTY
SEL E
E
E
E
E”.
∗ You cannot select “PTY SEL E
E
E
E
E” during a TA,
ALARM or PTY interrupt.
3. Press the [
] button to go to the PTY se-
lect mode.
4. Press any one of the [DIRECT] buttons. Alter-
natively, turn the [ROTARY] knob to select the
desired PTY.
∗ Below are the factory default settings stored for
the [DIRECT] buttons.
5. The PTY select mode is cancelled automati-
cally and returns to the RDS mode 7 seconds
after a PTY is selected.
PTY seek
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Press the [
a]/[d] button to select “PTY
SEL E
E
E
E
E”.
3. Press the [
] button to go to the PTY se-
lect mode.
4. Select PTY.
5. Press the [
a]/[d] button. If you press the
[
d] button, the unit seeks a PTY broadcast
moving up the frequencies; if you press the
[
a] button, it seeks moving down the fre-
quencies.
∗ If no station with the selected PTY broadcast
can be received, the unit returns to the previ-
ous mode.
RDS Operations
+VXZ758R_01-09-Eng.p65
05.3.1, 6:02 PM
20