Operation, Hints and tips, Auto function – FARBERWARE 103743 5 Cup Coffee Maker User Manual
Page 11
10
11
OPERATION
AUTO function
The appliance is equipped with an automatic brewing function, allowing you to set
the time you would like freshly brewed coffee.
NOTE: Using this function is only possible if the clock has been set.
NOTE: The time set, is the time the coffee will be ready.
Add the required amount of ground coffee in the permanent filter
•
(15) (ill.
c
).
Fill the water tank
•
(5) with the required amount of water (ill.
f
).
Place the carafe
•
(10) on the keep warm plate (9).
Press and hold the
•
AUTO button (17) for about 1 - 3 seconds. AUTO starts
flashing in the display (19).
Set the time by pressing the buttons
•
HOUR (20) and MIN (18).
Press the
•
AUTO button (17) to set and confirm the time. AUTO is shown in the
display (19).
NOTE: To cancel the AUTO function, press and hold the AUTO button (17) for about
3 seconds. AUTO is no longer shown in the display (19).
The
•
AUTO function is now set and the appliance will start the brewing process in
time to finish at the set time.
Once the brewing process starts,
•
AUTO is no longer shown in the display (19) and
the button (21) will illuminate.
NOTE: The set AUTO time will remain set until changed or the appliance is
unplugged. To use the AUTO function again, first press and hold the AUTO button
(17) for about 1 - 3 seconds. Adjust the time if required and confirm by pressing the
AUTO button (17) again.
HINTS AND TIPS
As a general rule, one measuring scoop
•
(16) of ground coffee equals one cup.
It is recommended not to place appliance under wall units, as rising steam can
•
cause damage to wooden furniture.
It is recommended using the charcoal filter although it is optional.
•
5-cup Coffee Maker_103743_IM_US_V2_121212.indd 11
12/12/12 3:53:20 PM