FARBERWARE 103744 12 Cup Coffee Maker - Manual (Page 10)

10 11
OPERATION
Connect the plug • (9) to a wall outlet (ill. i ).
The appliance is now is stand-by mode. On the display • (22), “12:00” will flash
for about 5 seconds and then change to be displayed constantly. The display •
backlight will be fully illuminated for about 30 seconds before dimming.
NOTE: Pressing any button at any stage will cause the display backlight to switch to
full illumination for about 30 seconds before returning to being dimmed.
Setting the clock
NOTE: Setting the clock is required to be able to use the AUTO function.
NOTE: The appliance has a 12-hour display (-/PM).
Press and hold • HR (23) or MIN (21) button for about 1 second to enter the clock
setting mode.
Press the • HR button (23) to set the hours on the clock. Each press will advance
the clock by one hour.
Press the • MIN button (21) to set the minutes on the clock. Each press will
advance the clock by one minute.
NOTE: Press and hold either the HR (23) or MIN (21) button, to advance through
hours/minutes rapidly.
NOTE: The clock will be reset if the appliance is unplugged from the wall outlet.
The clock needs to be set again.
NOTE: If no button is pressed for about 5 seconds, the set time will be saved and
the appliance returns to stand-by mode.
Brewing Programs
The appliance has 4 preset programs for brewing.
While the appliance is in stand-by mode, press the • STRENGTH button (24) to
set the required brewing program. The default mode is NORMAl (not shown on
display).
12-cup Coffee Maker_103744_IM_US_V6_130125.indd 10 1/25/13 5:34:27 PM