Evolution Engines 91NX - Manual (Page 4)

EN
4
Installing the Engine
1. Secure the engine mount on the airplane
firewall. Tighten the engine mount screws
in the firewall.
2. Install the engine on the engine mount
according to the airplane manufacturer’s
instructions.
WARNING: Tighten all engine
mounting screws before each flight. If
you do not tighten the engine
mounting screws, the screws may
vibrate loose and cause the engine to
separate from the fuselage.
Included Content
ENGINE
• Muffler
• Muffler Screws & Gasket
• Glow Plug (EVOGP1)
• In Line Fuel Filter (EVOA105)
• In Line Fuel Filter/Clunk (EVOA106)
• Instruction manual
• Decal sheet OPTIONAL ITEMS
• Startup Field Pack (HANSTART)
• Tachometer (HAN156)
• Blue Block After Run Engine Oil Applicator
(EVOX1001)
• Blue Block After Run Engine Oil Refill
(EVOX1002)
• #9 Performance Glow Plug (HAN3015)
• PowerPro 12V Starter (HAN161)
High-Speed Needle
Muffler
Glow Plug
Muffler Nipple
Fuel Nipple
Low-Speed Needle
Needle Limit Collar
Muffler
Glow Plug
Throttle Arm