ETS-Lindgren HI-3804 RF Industrial Compliance Meter - Manual (Page 13)

www.ets-lindgren.com Operation 13
4.0 Operation
CAUTION: Before placing into operation, follow the safety
information in the ETS-Lindgren Product Information
Bulletin included with your shipment.
Before Making Measurements
Note: The meter must be zeroed prior to making measurements.
Before making any measurements, determine the operating frequency of the
emitter(s) that will be surveyed for electromagnetic radiation field levels. The
frequency of the emitter(s) must not be lower than 10 MHz or higher than
42 MHz, which is the rated frequency range of the HI-3804 Industrial Compliance
Meter.
LCD Description