Compaq TFT5030 - Manual (Page 6)

Product Features
Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices, then
follow these steps:
1. Place the monitor in a convenient, well-ventilated location
near your computer.
2. Connect the signal and power cables to the monitor 1.
3. Connect the DC connector of the AC adapter to the DC power
cable that extends from the monitor base.
4. Connect the AC cable 3 to the AC receptacle on the AC
adapter.
5. Connect the monitor signal cable 2 to the appropriate video
connector on the rear panel of the computer.
6. Connect the power cable 4 to an electrical wall outlet.
4 Compaq TFT5030 Flat Panel Monitor User’s Guide