EFCO Special Purpose Windows General Maintenance Instructions - Manual (Page 3)

General Service and Maintenance Manual
SECTION 1
GENERAL INFORMATION
All EFCO products are designed for minimum maintenance requirements once
properly installed. Since all moving contacts are aluminum against nylon, no
lubrication is required. However, guide tracks should be cleared of dirt and debris
periodically.
The following sheets describe parts for the EFCO products supplied for typical
projects. Occasionally, a part will break and need replacing. Most of these parts are
stocked by EFCO and can be shipped immediately upon request. Please send all
requests to the following address:
EFCO
EXPEDITE DEPARTMENT
EFCO CORPORATION
1000 County Road
P.O. Box 609
Monett, Missouri 65708
Or
Call
Toll Free: 1-800-221-416
Fax: 417-235-7313
The materials in this packet are based on typical window types and job conditions.
Due to the custom nature of EFCO’s Business, some material in this packet may not
apply to your specific job. In as much as EFCO Corporation has no control over how
others may use this material, we do not guarantee that the same results as those
described herein will be obtained. Each user of the materials and/or procedures
should make their own tests to determine the suitability of the materials or procedures
for their own particular field use.
EFCO CORPORATION 2013 PAGE 2