Eden WTB1000 User Manual
Page 4
4
FRONT PANEL FEATURES
Input Jack Designed to accept a standard ¼ inch mono phone plug. For
best results use a high quality shielded cable to connect your instrument to
the amplifier. The input is buffered and will handle standard passive,
high level active, and piezo input signals.
Mute switch Mutes all the outputs except the Tuner Out, allowing for
silent tuning. Lead singers and guitarists love this feature! The indicator
lights up when Mute is ON.
Gain Control Regulate the first gain stage of the preamplifier and
controls the amount of signal available to the system.
Input Pad Pull gently on the Input Gain control to engage a -12dB pad.
This feature is very useful for basses that have a very hot signal level.
Compressor Control - This adjusts the threshold level of the compressor.
The ratio is fixed at an optimum point for bass reproduction.
Compressor Indicator - Lights to indicate that the signal has crossed the
threshold of the compression circuit and that compression is taking place.
Tube Control - This adjust the amount of Tube Distortion in the preamp.