Eden WT1000 - Manual (Page 3)

General Specifications
Size
3.5” x 19” x 14”
Weight 28 Lbs.
EIA rack 2 Space w/ min. clearance
Power Output @ 8 ohm x 2 240 Watts RMS
Headroom +3dB min.
Damping Factor better than 100 from 20Hz to 1Khz
Slew Rate
128V/8us
Rise time 11us
Frequency Response 13Hz to 36KHz +/- 3dB
Distortion THD .06 %
Power Requirements
The WT-1000 needs a separate properly grounded 20 Amp circuit @ 120
Volts for correct operation and best sound quality. FOR YOUR SAFETY
DO NOT REMOVE OR MODIFEY THE GROUND ON YOUR POWER
CABLE.
Fuse Requirements
USA @ 120 Volts /60 HZ (12) Amps, 5 x 20 mm GMC/T/slow blow
Europe @ 240 Volts/50 Hz (6) Amps, 5 x 20 mm GMC/T/slow blow
Japan @ 100 Volts/60 Hz (14) Amps, 5 x 20 mm GMC/T/slow blow
Operation and power requirements
For best electrical operation and sound quality this unit should have a
properly grounded, dedicated 20 Amp circuit for itself.
Front Panel Features
The WT-1000 has several unique features. Each channel is equipped with a
volume control, tone shift control, and an output limit level indicator.