The ce symbol, Quality certification, Copyright – Dyras MSL-7525 User Manual

Page 8

MSL-7525

THE CE SYMBOL

This device meets the requirements for safety and electromagnetic compatibility (EMS).
The relevant ‘CE’ mark can be found on the nameplate, on the packing box and in the instruction manual.

Dear Customer,

You are kindly requested to visit the dyras home page in the Internet from time to time, where you can be
informed about actual news concerning your product, get acquainted with our new devices or be informed about
our promotions.

You are requested to visit our home page www.dyras.com, where you can be informed about any current
information that may concern your device.

•

The external cover of the control unit may be cleaned with a chamois or a soft, lint-free cloth that's been
moistened with warm water. Take care to ensure no moisture enters the device. After cleaning, wipe the cover
with a dry, lint-free cloth.

•

If the massage pads are allowed to become dirty, they will no longer stick properly and may also irritate your
skin. Try to keep the adhesive part of the massage pad as clean as possible. Small amounts of dust and grease
may be removed from the pad by using a wet, soft, lint-free cloth (after removing the protective foil). Even
with careful use, the massage pads will eventually need replacement when they become worn, dirty or lose
their adhesion. These accessories must only be replaced by an authorised supplier or service engineer.

•

Do not use harsh or abrasive cleaning agents. Never use solvents (including acetone, alcohol, benzene or
petrol) to clean the control unit or massage pads because these materials could dissolve the external casing,
damage the internal components and irritate skin during use.

•

If you don't plan to use the device for a while after cleaning it, pack the control unit and the massage pads in
separate nylon bags. Put the two bags in the original product box and store it in a place that is free from dust,
damp and frost.

QUALITY CERTIFICATION

We certify that the dyras MSL-7525 electronic massager has the following technical characteristics:

Type: MSL-7525
Description: Electronic

massager

Nominal operating voltage:

DC 3V (using two LR03 'AAA' batteries)

Manufacturer:

The dyras wwe.factory, Inc. U.S.A.

We are continuously developing our products to keep them up-to-date, which means the technical data of our devices may change without
any prior notice. Errors and omissions excepted.

COPYRIGHT

All rights - including distribution by film, radio or television, translation, photographic or audio copying, abstract
reprint and other duplication - are specifically reserved. Any breach may result in criminal action.

User'sManual MSL-7525:User's Manual for MSL-7525 2010.05.12. 9:50 Page 14