Dynojet Compressed Air Pump Assy & Remote BOB Upgrade - Manual (Page 2)

T ECHNICAL
B ULLETIN
For assistance, call Dynojet Technical Support at 1-800-992-4993, visit www.dynojet.com,
or write to Dynojet at 2191 Mendenhall Drive, North Las Vegas, NV 89081.
P/N
98200023
•
V
ersion
4
•P
ag
e2o
f2
©2009-2012
Dynojet
Research,
Inc.
All
Rights
Reserv
ed.
06/2012SA
J UNE 2012
Compressed Air Pump Assembly
Remote Breakout Board Control Upgrade
(P/N 76493011 and P/N 76100010)
connect to the BRAKE terminals on the
Breakout board/Advanced Breakout board
secure the relay to one of the
screws on the Breakout
board/Advanced Breakout board
connect to the dyno brake solenoid wires
verify you have the correct wires by tracing the wires
back to the brake solenoid
(page 1, step 6)
connect to the
compressed air
pump assembly
solenoid wires
Breakout board
c
Advanced Breakout board
J1 J2
eddy current brake
and digital brake
digital brake
only
J2 J1
remove
brake solenoid
wires only—
leave 4WD
signal wires
in place,
if present
BRAKE