Cuddeback CUDDEVIEW X2 - Manual (Page 15)

13 12
• View these new images by selecting the Destination card
and using the key to view the most recent images.
Continue viewing in reverse order to eliminate having to
view all the images on the Destination card.
• Check additional cameras using this same “Rotation
Method.” By swapping the blank Source card with the
camera card you save the time of waiting for images to
copy. You also go home with all images saved to a single
Destination card.
CuddeView X2, can be used as a computer card reader.
• Turn CuddeView X2 “OFF”.
• Plug USB cable (included) into CuddeView X2 USB port.
• Plug USB cable into PC USB port.
• Turn CuddeView X2 “ON”.
• When “USB Mode?” is displayed, select YES to use
CuddeView X2 as a card reader, press NO to use
CuddeView X2 as a viewer.
• The SD card(s) in your CuddeView X2 will be available on
your PC.
• If you use Cuddeback’s Trophy Room Image Management
Software, all you need to do is press “G” on your
keyboard to copy images to your PC. Trophy Room is
available for FREE download at
www.cuddeback.com.
Using CuddeView X2 as a PC card reader
USB port
Bottom view
u