Cuddeback SEEN FAMILY - Manual (Page 10)

® firmware to improve its
performance. If a firmware update is required you
will need to download a firmware file from our
website. Instructions will be provided with the firmware.
Please see www.cuddeback.com for details. We
recommend you check our website for updates at
the beginning of your scouting season.
Setting SEEN ® Parameters
3OME ® features can be changed by the user.
3%%. ® can also be programmed to become a time lapse
camera. (Note - In the text that follows the underlined
items are default settings. For most users these settings
are not required and you can leave PO set to 0).
Step 0: Enable or disable parameters OR select
Time Lapse Operation
&IRST
RECOMMENDED
P0:1
as desired
P0:tL = time lapse mode. Attack is put into time
lapse mode as explained later.