Cortelco 3200 - Manual (Page 9)

WALL MOUNT INSTRUCTIONS
1. Mounting wedge should already be installed onto the base. If not, install mounting
wedge onto base.
2. Connect the adapter and the line cord. See Steps 1 & 2 under “Installation” for
specific instructions.
3. Push out the handset hook and reattach in opposite direction for the wall mount posi-
tion, plug the short end of the coiled cord into the handset, and then plug the other end
of the cord into the base.
4. Place the handset on the base.
Note: To alter the mounting bracket angle, pull
the lever up and rotate the mounting wedge.
The unit will be shipped in wall mount position.
U
NIT
S
ETUP
FACTORY PRESETS
The following table shows you the factory settings for your unit:
Display Setting
SELECT LANGUAGE English
STUTTER TONE No
ENTER AREA CODE no setting
SET LDS CODE 1
EDIT TIME & DATE no setting
FLASH TIMER 600 ms
RINGER CADENCE 3
RINGER VOLUME 5
VOICEMAIL NUMBER no setting
#3 SEC PAUSES no setting
VM PASSWORD no setting
Note: After you have set up the unit completely for the first time, use the MENU button
to review or reprogram the Language, Area Code, Program VM, LDS Code, or Setup
Features.
3
Lever to alter angle.