Code 3 MicroCom 2 Siren - Manual (Page 15)

15
Specifications, 3992 / 3992XAMP Sirens
Input Voltage: 10 to 16 VDC, negative ground - 12V units
(Note: Operation above 15 VDC for an extended period of time may result in speaker damage.)
20 to 30 VDC, negative ground - 24V units
(Note: Operation above 30 VDC for an extended period of time may result in speaker damage.)
Operating Current 100W: 8 Amps @ 13.6V with 11-ohm load ( 100 W Spkr ) - 12Vunits
4. 5 Amps @ 27.6V with 11-ohm load ( 100 W Spkr ) - 24Vunits
200W:
14 Amps @ 13.6V with 5.5-ohm load ( 2- 100 W Spkr ) - 12V units
9 Amps @ 27.6V with 5.5-ohm load ( 2- 100 W Spkr ) - 24V units
Standby Current: 25 mA excluding backlighting
Cycle Rate: WAIL - 11 cycles/minute.
YELP - 200 cycles/minute.
Voltage Output ( approx. ) 58V peak-to-peak with 5.5 ohm load ( 2-100 W Spkrs )
Primary Tones: (standard) Wail, Yelp, Hi-Lo, Air Horn
Secondary Tones: (standard) HyperYelp, HyperLo
Primary Tones: (optional) Wail, Yelp, Air Horn
Secondary Tones: (optional) HyperYelp
Note: The 3992XAMP provides opposing tones for use in dual siren applications:
3992 Tone 3992XAMP Tone
Wail Wail
Yelp Wail
HyperYelp Yelp
HILO Yelp*
HyperLo** Yelp
Manual Manual
Air Horn Air Horn
*Yelp Yelp w/ No HILO option
**The HyperLo tone is produced by the 3992 siren in Hit&Go mode only.
Audio Section:
Noise Cancelling Plug-In Microphone
Audio Response:
±
1 dB 300 to 3000 hz.
1000 hz. 0 dB Reference
Special Features:
Instant “ON”, Park Kill, Adj. Backlighting, “Hit&Go” Mode, “Scroll” Mode w/ Instant Air Horn, “Scroll-Off” Mode
w/Instant Air Horn (optional), Automatic Short Circuit Protection, Instant Public Address, Status Indicator LED,
Radio Rebroadcast (RRB), Remote Siren Switching Input (Horn Ring or Remote Switch), +12VDC or Ground
operation
Dimensions and Weight:
Control Head: 4.625"W x 2.625"H x 1.9"D, Mounting Hole Centers: 2.250"
Amplifier: 7.625"W x 2.5"H x 7.0"D, Mounting Hole Centers: 7.125" x 4.375"
Standard Control Cable Length: 20 Feet
Shipping Weight (3992) 5.75 lbs; (3992XAMP) 4 lbs