Climadiff CLE18- CLE51 - Manual (Page 25)

25
Reversing the door:
The instruction is based on a unit with right door hinge installed already.
To reserve the door from right hinge to left hinge, you need to get ready 2 new spare parts: an upper left hinge,
and a bottom left hinge.
All removed parts must be saved to do the door reinstallation, except those remarked with “Disused”.
1 Open the door, and loosen the 2 screws ① and ② . See Figure 1.
2 Carefully remove the door from the upper right hinge ④ and prevent it from scratching. Take
out the support rod ③ from the door hinge hole. See Figure 2.
3 Pull out the 6 decorating plastic bolts covering the reserved hinge screw holes at the front left corner of
the cabinet.
4 Unscrew the upper right hinge
○
,4(Disused) and bottom left hinge
○
,6 (Disused) from the
cabinet. See Figure 3.
5 Install the upper left hinge
○
,7and bottom left hinge
○
,8 to the left side of the cabinet. Make
sure the screws are tightened. See Figure 4.
6 Put upside down the door and install it to the left hinges by following the opposite steps of
taking down of the door as described above
7 Cover the hinge screw holes on the right side with the 6 decorating plastic bolts.