Loading, Compliance with maximum loads – Climadiff DV265AGN7 User Manual
Page 53
53
LOADING
The desired temperature after the wine cellar starts running will only be reached after many hours
of operation. We recommend running your wine cellar empty for a few hours before you start
loading it.
Your wine cellar is delivered with one or more wine bottle shelves made of metal or wood according to the
models :
Place the supports in appropriate lateral notches inside the cabinet to fit your needs. Make sure that
the supports are inserted correctly in the notches (only a slight pressure is necessary to put the angle
iron in place and make sure that it holds properly).
Start by loading the lower part of your wine cellar.
Then simply stack the bottles with their bases facing backward in the back row and conversely for the
front row. The wine bottle trays are to be arranged according to the size of your wine cellar and the
shapes of your wine bottles.
IMPORTANT : Make sure that the bottles do not come in contact with the inner cabinet's back
wall.
If you have a large number of bottles, we recommend that you load 40 bottles at a time and then let the
device run for 12 hours before you load another 40 bottles. Repeat this operation as many times as
necessary in order to create a thermal mass in your wine cellar.
Additional wine bottle shelves are available on a paying basis from the after-sales service of your retailer or
via our Internet sit
under the heading "accessories" or else via
(only for wood wine bottle shelves).
As for metal wine bottle shelves, they are only available on a paying basis from the after-sales service of
your retailer.
COMPLIANCE WITH MAXIMUM LOADS
The limit load per shelf must be complied with.
Do not exceed the designated maximum capacity (warning : do not obstruct the activated charcoal filter).
The wine bottle shelves are to be arranged according to the size of your wine cellar and the shapes of your
wine bottles.
Fixed wine bottle trays : 175 kg (approximately 130 bottles, 7 levels of 75 cl bottles by shelf maximum)
Sliding wine bottle trays : 25 kg (approximately 15 bottles)
These are maximal loading values. Any obligation to load the maximum of bottles indicated per shelf. You
can also load without any shelf.