Catler TS 8011 - Manual (Page 10)

6. Approximately 10 seconds before the end
of the selected browning setting, the Lift &
Look button will cease illumination. As the
toasting stops and the carriage rises, the
TOAST/CANCEL button surround will flash
and the LED toasting progress indicator will
cease flashing. The LED toasting progress
indicator will re-illuminate to the previously
selected browning setting.
7. Once the toasting cycle has completed
and the carriage has risen and locked into
the raised position, the toast ready alert
will sound. Remove the toast. The TOAST/
CANCEL button surround will re-illuminate
in blue for up to 30 seconds, ready for the
next toasting cycle.
NOTE:
The toaster will revert to stand-by mode
after 30 seconds if a button is not pressed
or the slide is not adjusted. The TOAST/
CANCEL button surround and LED toasting
progress indicator will cease illumination.
NOTE:
The toaster will re-activate from stand-
by mode and the TOAST/CANCEL
button surround and LED toasting
progress indicator will illuminate when:
a. Any of the buttons are pressed.
b. The browning control slide is moved.
c. The power at the power outlet is
turned off then on again.
TOAST/CANCEL BUTTON
The TOAST/CANCEL button surround will illuminate
in blue for up to 30 seconds when the appliance is
turned on. The toaster will revert to stand-by mode
after 30 seconds if a button is not pressed or the
browning control slide is not adjusted.
•
Press the TOAST/CANCEL button once to
lower the carriage and start the toasting
process. The TOAST/CANCEL button
surround will then illuminate in red.
• Press the TOAST/CANCEL button during
operation to cancel the toasting process
or any other function. The TOAST/CANCEL
button illumination will change from red to
blue and stay illuminated for up to
30 seconds.
NOTE:
Toasting can be stopped at any time by
pressing the TOAST/CANCEL button
located on the top of the toaster. This
will cancel the operation and the
carriage will move to the raised position.
NOTE:
The TS 8011 toaster features a LIFT & LOOK
button. This automatically raises the
carriage without cancelling or resetting
the selected browning setting. Use the
LIFT & LOOK button to view browning
progress during the toasting and, if
necessary, cancel the process when the
desired toast colour is achieved.
A BIT MORE button
This feature can be selected after or during the
toasting cycle.
To use this feature during the toasting cycle:
1a. The A BIT MORE button surround will
illuminate in blue when selected. The
toasting time will automatically increase but
will not illuminate more of the LED toasting
progress indicator. A BIT MORE function can
be cancelled by pressing the A BIT MORE
button again and the original toasting cycle
will continue.
To use this feature after the toasting cycle has
completed:
1b. The A BIT MORE button surround will
illuminate in blue when selected. The
carriage will automatically lower and
begin the additional toasting time.
The LED toasting progress indicator
will automatically align with the lowest
browning setting then flash and count down
for the additional browning time.
2. The TOAST/CANCEL button surround will
also illuminate in red and the Lift & Look
button surround will illuminate in blue
allowing you to check on the toasting
progress and, if necessary, cancel the cycle
by pressing the TOAST/CANCEL button
when the desired toast colour is achieved.
3. Approximately 10 seconds before the
end of the additional browning, the Lift
& Look button will cease illumination. As
the toasting stops and the carriage rises,
the TOAST/CANCEL button surround will
8
OPERATING YOUR TS 8011 TOASTER