CASO Germany Vario Power 3400 Classic (2240) - Manual (Page 42)

caso Vario Power 3400 Classic 42
• With the + / - Keys (5+6), you can change the settings at any time in a range from 1 –
12.
Please note
► We recommend to select the function “Power Mode” in case of steaming food or boiling
water for example. So the overheating protection “E05” will not be activated.
13.4.3 Temperature Mode
• Press the Function Key 2. to select the temperature. The preset temperature stage
"120°C" is selected and the device turns on.
• With the + / - keys, you can change the settings at any time in a range from 60 – 240°C.
(Temperature stages: 60, 70, 80, 90, 100, 120, 140, 160, 180, 200, 220 and 240°C)
Please note
► In case of grilling or cooking deep fry food we would advise you to use the function
“Temperature” as in this case you can use temperatures up to 240°C. Otherwise the
overheating protection “E05” will be activated.
•
13.4.4 Timer
• After the selection of the temperature mode press the button Time 4. until the
corresponding control lamps blink. The display shows the number "0". With +/- keys,
you can now select the operating time in 1-minute intervals (up to max. 180 minutes).
Once the time is up, an acoustic signal sounds and the device automatically goes into
standby mode.
Please note
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
13.4.5 Powersharing Mode
• • If both induction fields are operated, the boards will share over power sharing function
levels as follows:
left 12 11 10 9 8 7 6 5 4 3 2 1
right 5 6 7 8 9 10 11 12 12 12 12 12