Brondell FreshSpa Dual Temperature Bidet - Manual (Page 11)

7) Connect Bidet Hose to Bidet Attachment
a. Remove pressure cap from COLD
connection on backside side of bidet
attachment and connect open end of Cold
Water Bidet Hose to COLD connection.
Installation
Step 7a
6) Install Bidet Attachment on Toilet
a. Place one of the large rubbers washers
over each of the open bolt holes on the
toilet fixture.
b. Place bidet attachment over washers
so the nozzle is as close to the back of
the toilet bowl as it will go. This will vary
by toilet.
c. Make sure the adjustable brackets line
up with the holes in the toilet fixture.
You may need to move the adjustable
brackets accordingly to line up properly.
d. Replace the toilet seat on top of bidet
attachment and secure using original
toilet seat hardware. Make sure to tighten
so that the bidet attachment and seat do
not move.
9