beautypg.com

Remote disarming, Tamper alert, Silent arming / disarming – Clarion MS5500 User Manual

Page 12

background image

Page 8 - MS5500 Owner’s Manual

Remote Disarming

To Disarm the System:

Press Button 1.

• The siren will chirp twice.*
• The doors will unlock.
• The parking lights will flash twice.
• The dome light will turn on.
• The LED will turn off.

* The siren chirps during disarming will alert you if the system had been triggered while armed.

2 chirps

=

normal disarming

1 long chirp

=

Tamper Alert - system was triggered

Tamper Alert

On Disarming, if the system responds with one long chirp, indicating the system was triggered,
the LED will flash for 60 seconds to indicate the zone that triggered the system. If the Audible
Tamper Alert Report
feature is turned on during installation, the siren will chirp to indicate the
triggered zone.

LED Flashes (60 seconds):

1 flash

=

door

2 flashes

=

Logic Sensor II

3 flashes

=

optional sensor

4 flashes

=

trunk

example: flash-flash-pause-flash-flash-pause = Logic Sensor

Siren Chirps (once only)

1 chirp

=

door

2 chirps

=

Logic Sensor II

3 chirps

=

optional sensor

4 chirps

=

trunk

Silent Arming / Disarming

Each Remote Transmitters can be individually set to Arm and Disarm the system with or without
chirp confirmation at the time they are programmed into the system (see Adding a New
Transmitter into the System
).

To temporarily cancel the Arming and Disarming confirmation chirps, you can Arm or Disarm the
system by pressing Buttons 1 and 2 together.

Note: The confirmation chirps will only be cancelled if the system status is normal. The chirp indications for Tamper

Alert and the open zone warning will not be cancelled when the system is Armed or Disarmed silently .

MS5500_owner’s 1.34.qxd 12/6/99 12:15 PM Page 8