AVer U10 - Manual (Page 2)

Connecting the External USB Device to AVerVision U10
Connecting the Power Adaptor
Connect the power adapter to a standard 100V~240V AC power outlet.
The power from the computer USB is sufficient enough to power AVerVision U10. However, if your laptop or desktop
USB port does not supply as much power as the USB specification says it should, then you may encounter problems
and need an external power supply.
The symptoms of insufficient power are typically the U10 randomly appearing and disappearing from Device Manager,
and accompanying beeps. If a power supply is required, the specification for the power adapter is 5Vdc, 3A.
General Specification
86B86B
Image
Sensor CMOS
Pixel Count 1.3 megapixels
Frame Rate 30 fps (max.)
TV Lines 600 (center)
RGB output 1280x720, 1024X768, 800X600
87B
Optics
Focusing Auto
Shooting Area 355mm x 279mm (14in x 11in)
Zooming 8X Digital Zoom
88B
Power
Power Source
DC 5V, 100-240V, 50-60Hz from host
equipment or adapter
Consumption 2.25 Watts (lamp on); 2.0 Watts (lamp off)
89B
Lighting
Lamp Type LED light
90B
Input/Output
USB mini
Power and signal connectivity to host
equipment
USB Hub (2x) USB2.0
DC 5V Input Power Jack
MIC Built-in
91B
Dimension
Operating
390mm x 248mm x 447.5mm (+/-2mm
include rubber foot)
Folded
259mm x 163mm x 38.79mm (+/-2mm
include rubber foot)
Weight 1.5KG (about 3.306lbs)
USB Mouse
USB Flash Drive
Power adapter
Wall outlet