Slide number 2, Wifi setup (optional), Complete registration – Astak MOLE VGA User Manual

Page 2

WiFi Setup (Optional)

Complete Registration

In the Remote Setup, you can detect cameras, create
accounts, and name your camera

1) Find Camera

2) Register User

3) Register Camera

1. WiFi networks are scanned and listed
2. Select the network and enter security code
3. Press Join to check then activate WiFi
4. Follow verification steps to ensure access
5. Disconnect both Ethernet Cable and Power
6. Plug in the power ONLY to restart the camera

in WiFi mode

Note: WiFi access varies by distance and position.

After plugging the power back, the LED on
the front of the camera will turn blue to let
you know that it has connected successfully
over WiFi.

Note:

To go back to Ethernet mode, unplug
the power from your camera, plug in
an Ethernet cable, and plug the power
back in to the camera.