Astak Mobivue - iOS User Manual - Manual (Page 8)

4. Password setup:
WARNING: You MUST change Password from default “Admin”
5. Wi-Fi Setup
Note: After successfully linked, STATE1(STA1) flashing 3 times in each 3 second in green.
1.Select
"Admin
Password"
2. Change the password
3. Click Apply
1.Select
“Wi-Fi”
2.Select
“Client
mode”
3. Select the Wi-Fi
connection
4. Enter the
router's
password
5.Click
Apply
6.When screen shows “Set
Successfully disconnect
network (Ethernet) cable