AItech ProPC/TV Wireless Mini - Manual (Page 8)

Chapter 3. Installation
5
NOTE: Make sure “PCTVsender ”, Computer and TV are all power off
before installation
3.1 Transmitter connection:
3.1.1 Connect Antenna to “ANT” of Transmitter
3.1.2 Steps for VGA to TV function as below
1. Properly connect the 15-pin HD extension VGA cable between VGA
port (Computer) and “VGA IN” (PCTVsender) input port.
2. Connect PC monitor cable to “Monitor” (PCTVsender) output port.
3. Connect the 3.5mm x 3.5mm audio cable to “LINE IN”
(PCTVsender) from Computer SPEAKER-OUT.
4. Switch correct system of NTSC/PAL switcher.
or
3.1.3 Steps for Video to TV function as below
1. Connect RCA video/audio cable from external device (e.g. DVD
player) AV out to “PCTVsender” (V-IN and A-IN).
3.1.4 Connect 5V power adapter to “DC5V” (PCTVsender) power port.
3.2 Receiver connection
3.2.1 Connect Antenna to “ANT” of Receiver.
3.2.2 Properly connect RCA video/audio cable from “ProPC/TV Wireless
Mini” (V-OUT) (A-OUT) to TV’s AV input port.
3.2.3 Connect power adapter to “DC 6V” (PCTVsender) power port.