Capresso Impressa J5 - Manual (Page 27)

• If you use the machine all day change the setting to the largest
use interval, e.g. 4 hours. This way the machine is always
ready to brew coffee.
Changing the AUTO-OFF setting:
READY ,
• Push and hold the rotary dial until the display shows RINSE .
• Turn the dial clockwise until the display shows AUTO OFF .
• Push the rotary dial. The display shows 2 HRS .
• Turn the dial to set desired setting and push the dial to confirm.
For two seconds the display shows OK and then AUTO OFF .
• Turn the rotary until the display shows EXIT .
• Push the rotary dial. READY .
17.7 LOOKING UP INFORMATION
The J5 lets you check...
• how many cups of coffee you made total and individually for
each beverage button including the ground coffee funnel,
• how often you used the steam and hot water button,
• how how often you de-scaled the machine,
• how how often you ran a tablet cleaning cycle (CLEAN)
• how how often the filter was changed/activated.
It will also indicate if descaling, tablet cleaning or filter change
will be due soon.
READY .
• Push and hold the rotary dial until the display shows RINSE .
• Turn the dial clockwise until the display shows INFO .
• Push the rotary dial. The display shows BUTTONS .
• Turn the dial to select from the following sub-programs:
BUTTONS , DE-SCALE , CLEAN , FILTER (Filter will only come
up, if a Clearyl filter is activated), EXIT .
Example: You would like to know how often the 1-Espresso
button was used.
•
INFO . Turn the dial until the display shows BUTTONS .
• Push the dial. The display will show the total number of coffees
made, e.g. 36.
• Now push the 1-cup Espresso button. The display will show
how often this button was used, e.g. 12.
• Push the dial again. The display shows BUTTONS .
• Turn the dial until the display shows EXIT .
• Push the button. The display shows INFO .
• Turn the dial until the display shows EXIT and push the dial.
READY .
17.8 CHANGING THE DISPLAY SETTINGS
This function lets you select the time format AM/PM or 24HRS
format and the volume either in ounces OZ or milliliters ML.
READY .
• Push and hold the rotary dial until the display shows RINSE .
• Turn the dial clockwise until the display shows DISPLAY .
• Push the rotary dial. The display shows ML/OZ.
• Turn the dial to choose from 24 H / AM PM or ML / OZ or
EXIT .
To change the coffee volume display from OZ to ML,
chose
ML / OZ and push the dial. OZ .
• Turn the dial to select ML and push to confirm. For two
seconds the display shows OK and then it shows ML / OZ .
• Turn the dial to EXIT and push. The the display shows DIS
PLAY .
• Turn the dial until EXIT and push the dial. READY .
27.