Acolyte DMX Mini - Manual (Page 4)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
PA G E 3
I N S TA L L AT I O N
1
3
2
Mount an electrical box inside the wall.
The controller can be installed in any
standard 60 mm electrical gang box.
You can insert the AC/DC adapter
inside or outside the backbox.
Mount the back of the controller on the wall using 2 or more
screws.
Plug the green terminal block into the back of the front panel.
Snap the front panel onto the back and lock with a screw into
the bottom of the front panel.
Wait 30 seconds for the touch sensitivity to adjust.
Connect the wires.
DMX: Connect the DMX cable to the
external DMX interface.
Power: Connect the AC/DC adapter
POWER
DC +
POWER
Ground
DMX
Ground
DMX -
DMX +