Cortelco DISPOSITION PLUS 2200 - Manual (Page 10)

10
After the adapter is connected, you can make the initial settings of the unit as indicated
below.
1. [ SET LANGUAGE] appears on the display. Press the REVIEW UP ( ) button to
select the language. E - English, F - French, S - Spanish, and then press the DIAL
button to confirm the selection.
2. When [LCD CONTRAST] appears, press REVIEW UP ( ) button to make the
contrast darker or the REVIEW DOWN ( ) button to make the contrast lighter.
3. When [SET AREA CODE] appears, use REVIEW UP ( ) button and REVIEW
DOWN ( ) button to set your local area code.
Use the REVIEW UP ( ) button - to select digits 0, 1, 2, -9
Use the REVIEW DOWN ( ) button - to move to the next digit.
When you are finished setting the local area code, press Dial.
4. When [SET LDS CODE] appears, press the REVIEW UP( ) button to select the
long distance code ( 0, 1, 2, -9). In the USA and Canada the LDS code is normally
set to 1. When you are finished, press DIAL.
5. When [SET ACCESS CODE] appears, use the REVIEW UP ( ) button or the
REVIEW DOWN ( ) button to set your access code. This Code can range from _
to 9. It used to obtain an outside line when using a PBX and some Centrex
applications. This feature can be used with Caller ID and Memory Locations.
6. The time and date are automatically set when a caller ID (CID) number is received.
The unit will keep the current time accurately, and is updated each time a CID
number is received.
E
SET LANGUAGE
2
LCD CONTRAST
- - -
SET AREA CODE
1
SET LDS CODE