beautypg.com

Child lock( [sj ), Ip^ri <0‘t_ c, Tub clean( * ) – LG F84882WH User Manual

Page 19: Ow to use washer, I p ^ r i

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

ow to use washer

Child Lock( [Sj )

Medic Rinse

r

&

Pre Wash

If you choose to lock the buttons on the control

assembly to prevent tampering this function may

be selected.

• Child Lock can be set by pressing the

Medic

Rinse

button and

Pre Wash

button

simultaneously. (About three seconds)

i p ^ r i

<0‘t_ c

•To deactivate Child Lock system, press

Medic

Rinse

and

Pre Wash

buttons simultaneously

again. (About three seconds)

Pre Wash

•To change to the desired program, whilst in

child lock mode.

1.

Press both

Medic Rinse

and

Pre Wash

together once again.

(About three seconds)

2.

Press the

Start/Pause

button.

3.

Select the desired program and press the

Start/Pause

button again.

Change the

desired

program

• The child lock can be set at any time and it can

be deactivated only by using child lock cancel

process. Turning the power off and operafional
errors will nof affecf child lock.

Tub Clean( * )

Intensive

~1

Crease Care

Hr

j

Tub Clean course can be set by pressing and

holding

Intensive

and

Crease Care

button

simultaneously.

When Tub Clean course is set, display “ tci. ”■
and all buttons are inoperable.

TUB CLEAN

is special cycle to clean the inside

of the washer. This cycle uses higher water level
with higher spin speed. Perform this cycle

regularly.

How to use the Tub Clean cycle:

f. Remove any clothing or items from the washer

and close the door.

2. Open the dispenser drawer and add Anti

limescale (Calgon) to the Main wash
compartment.

NOTE:

Do not add any detergent to the detergent

compartments. Excessive suds may
generate and leak from the washer.

3. Close the dispenser drawer slowly.

4. Power On and then press and hold

Intensive

and

Crease Care

button

for 3 seconds, then “ tcL ”displayed in LED.

5. Press the Start/Pause button to start.

6. After the cycle is complete, leave the door

open to dry around the washer door opening,

flexible gaskef and door glass.

A CAUTION:

If there is a small child, be

careful not to leave the door
open for too long.

This manual is related to the following products: