Cabletron Systems Expansion module 9F125-08 - Manual (Page 3)

1
Appendix
9F120-08 / 9F122-12 / 9F125-08
Module Specific Information
Introduction
This appendix contains local management information that is specific to the
9F120-08, 9F122-12 and 9F125-08 MicroLAN modules.
Default Interface Codes
The Default Interface field on the General Configuration Screen allows you to
enter a number (one through three). Each number represents a default interface
for the selected module. The table below lists the numbers you can enter, each
number’s corresponding interface, and a brief description of that interface. The
default for this field is NONE, meaning no default interface selected.
Table 1. 9F12x-xx MicroLAN Module Default Interface Codes
Number Interface Description
1 SMB-1 1 mbps System Management Bus
2 SMB-10 10 mbps System Management Bus
3 FNB Flexible Network Bus (dual attached)