Craftsman 917.388721 - Manual (Page 17)

TROUBLESHOOTING CHART
PROBLEM CAUSE CORRECTION
Grass catcher
notf]lling(lfso
equipped)
1. Cutting height too low.
2. Lift on blade worn off.
3. Catcher not venting air. 1. Raise cutting height.
2. Replace blade.
3. Clean grass catcher.
Hard to push 1. Grass is too high or wheel
height is too low.
2. Rear of lawn mower
housing or blade dragging
in grass.
3. Grass catcher too full.
4. Handle height position not
right for you.
1. Raise cutting height.
2. Raise rear of lawn mower
housing one (1) setting
higher.
3. Empty grass catcher.
4. Adjust handle height to
suit.
17