Craftsman 315.175320 - Manual (Page 3)

SAFETY RULES
READ ALL INSTRUCTIONS
■ Read the^ instructions and the instructions for
the router motor thoroughiy before using this
accessory.
■ Know your power tooi. Read the operator's manual
for the router motor carefully. Learn the router's
applications and limitations as well as the specific
potential hazards related to this tool.
■ Keep the work area clean and well lit. Cluttered
benches and dark areas invite accidents.
■ Always wear safety glasses with side shields.
Everyday eyeglasses have only impact-resistant
lenses; they are NOT safety glasses.
Disconnect the plug from power source before
making any adjustments, changing accessories,
or storing the tool. Such preventive safety mea­
sures reduce the risk of starting the tool accidentally.
Do not use this product with other equipment or
for other purposes.
Save these instructions. Refer to them frequently
and use them to instruct other users, if you loan
someone this product, also loan these instructions.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves
eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention
measures.
SYMBOL MEANING
A
DANGER: indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
A
WAR NING : i ndicates a potè nti al ly hazardou s situati on, which, if not avoided, cou Id resu It i n seriou s i nj u ry.
A
CAUTION: indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices that may cause property damage.
Important: Advises you of important information or instructions vital to the operation or maintenance of
the equipment.
Note: Advises you of additional information concerning the operation or maintenance of the equipment.
UNPACKING
INSTRUCTIONS
■ Carefully remove the accessory from the box.
■ Make sure that all items listed in the packing list are
included.
■ Inspect the accessory carefully to be sure no break­
age or damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool with the accessory.
■ If any parts are damaged or missing, please call
1 -800-932-3188 for assistance.
PACKING LIST
Plunge Base
Vacuum Attachment
Screws (2)
Operator’s Manual
A WARNING: If any parts are missing, do not
operate your tool until the missing parts are
replaced. Failure to do so could result in serious
personal injury.