Craftsman 104.79212 - Manual (Page 4)

UNDERSTANDING YOUR TRIMMER
SAFETY & INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
D
WARNING: Indicates danger, warning or caution.
May be used in conjunction with other symbols or
pictographs.
1
ON / OFF STOP CONTROL ON / START/ RUN
WARNING: READ OPERATOR'S MANUAL:
Read the operator’s manual(s) and follow all warnings
and safety instructions. Failure to do so can result in
serious injury to the operator and/or bystanders.
o
ON / OFF STOP CONTROL OFF or STOP
WEAR EYE AND HEARING PROTECTION WARNING:
Thrown objects and loud noise can cause severe eye
injury and hearing loss. Wear eye protection meeting
ANSI Z87.1 standards and ear protection when
operating this unit. Use a full face shield when needed.
15m
(50 fi )
KEEP BYSTANDERS AWAY WARNING:
Keep all bystanders, especially children and pets, at
least so feet (15 m) from the operating area.
OIL: Refer to operator's manual for the proper type of oil.
HOT SURFACE WARNING:
Do not touch a hot muffler, gear housing or cylinder. You
may get burned. These parts get extremely hot from opera -
tion. They remain hot for a short time after the unit turned off.
THROWN OBJECTS AND ROTATING CUTTER CAN
CAUSE SEVERE INJURY WARNING:
Do not operate without the cutting attachment shield in
place. Keep away from the rotating cutting attachment.
SHARP BLADE WARNING:
Sharp blade on cutting attachment shield. To prevent
serious injury, do not touch the line cutting blade.
Muffler Guard
Starter Rope
Grip
Fast Idle
Lock
/miF
Serial Number
Air Filter
Cover
Hassle Free
Cutting Head
Propane Canister
NOTE: This illustration may differ from your unit.
For example, the picture shows a straight
shaft; your unit may have a curved shaft.